478-250-9880
Select Page
Horizontal Belt-Driven Pumps offer many disadvantages

Horizontal Belt-Driven Pumps offer many disadvantages

In the old days, antiquated grit pump technologies were designed using a cup-style impeller which included a rim around the outside diameter or circumference of the impeller. This style impeller cannot be trimmed and requires use of v-belts to change the pump speed to...
CAMBI HEX Digester Recirculation Pumps

CAMBI HEX Digester Recirculation Pumps

Egger Turo Sludge Pumps are ideal for CAMBI’s Thermal Hydrolysis treatment of sludge and bio-degradable waste for wastewater treatment, food waste or co-digestion projects. Liverpool WWTP – Medina, Ohio (Operating since 2019) Egger Turo pump model TV 81-80 H4 LB...
Egger Pump Pumping Fibrous Wastewater Rags Without Clogging

Egger Pump Pumping Fibrous Wastewater Rags Without Clogging

Problem: Non-clog pumps cannot pump fibrous wastewater rags without clogging   Solution Egger: (4 x 3 inch suction/discharge passes a full 3 inch non-compressible)   Solution Egger: above 4 inch pump use model EOA – 2 vane semi-open impeller with spiral...
Egger Vortex Grit Pump running since 1990 in Florida

Egger Vortex Grit Pump running since 1990 in Florida

This Egger Turo Vortex pump type TV 71-80 H6  for grit is running since 27 years without failure at the sewage treatment plant in Mary Esther, a beach community neighboring Fort Walton Beach in Florida. High sand loading from the beach results in pumps that wear down...
Wastewater grit removal with Egger pumps

Wastewater grit removal with Egger pumps

In the mechanical pre-treatment of wastewater treatment plants, the grit removal pumps used on washers and classifiers are exposed to very harsh conditions. The sand-water mixtures have higher or lower abrasive properties depending on the local geological conditions...